Accessories
Showing 1–12 of 15 results
-
Intelli-Cables Jumper Cables
$39.99Part No: 561
Intelli-Cables Jumper Cables
$39.99FEATURES
- Designed for use with the Allstart 1st Generation Boost Max (560) and
2nd Generation Micro Boost (540) - Safest cables available on market.
- Reverse Polarity Protection
- Short Circuit Protection
- No Spark Technology during hookup or if clamps touch.
- Tests for defective battery
Quick View - Designed for use with the Allstart 1st Generation Boost Max (560) and
-
Flex Mount Wireless Charger
$37.29Part No: 59900AS
Flex Mount Wireless Charger
$37.29Wireless charging of mobile phones. Place your wireless charging enabled phone or device on the base and begin to charge
• Suction Cup attaches to windshield or dash for a customizable fit
• Air vent adapter included
• Quick-adjust, extension arms fit nearly any phone or device
• Two mounting options designed to fit all vehiclesQuick View -
OBD2 Memory Saver with EC5 Connector
$34.99Part No: 83
OBD2 Memory Saver with EC5 Connector
$34.99The Allstart OBD2 memory saver is an accessory specially designed to work with the Boost (Model 550) portable power source, or any portable power source with a 12V/10V, EC5 connector. The memory accessory can be used to preserve vehicle codes and electric presets while a vehicle’s battery is disconnected.
• The 3rd generation memory saver designed for use with the 550 Boost lithium portable power source with EC5 Connections
• Saves service time during battery disconnect or exchange
• Removes the need to document and reprogram settings
• Comes with a fuse and back charge protectionQuick View -
Intelli-Clamps
$33.72Part No: 561-2
Intelli-Clamps
$33.72Features
Intelli-Clamps are designed for use with the second-generation Allstart Boost Max. These safe cables are made from UL94-V-0 fireproof material and feature 100 percent pure copper inserts in each of the clamps. The dual connectivity on the clamps offers better conduction and lower heat build-up. Allstart Intelli-Clamps also provide anti-spark, reverse polarity, short circuit, reverse charge, under voltage, and over current protection.
Out of stock
Quick View -
Intelli-Clamp for 3rd Generation Micro-Boost (550)
$32.99Part No: 551-13
Intelli-Clamp for 3rd Generation Micro-Boost (550)
$32.99Intelli-Clamp for 3rd Generation Micro-Boost (550)
Quick View -
OBD2 Memory Saver
$32.99Part No: 77
OBD2 Memory Saver
$32.99The Allstart OBD2 Memory Saver is an accessory specially designed to work with the Boost Max (Model 560) portable power source, or any portable power source with a 12V/10A 5.4mm barrel port. The memory saver accessory can be used to preserve vehicle codes and electronic presets while a vehicle's battery is disconnected. The only memory saver designed for use with the Boost Max lithium portable power source with fuse and back charge protection. Saves service time during battery disconnect or exchange, by removing the need to document and reprogram settings back into the various components and accessories.
Works with the 1st Generation 560 Boost Max only.
Patent Pending
Quick View -
OBD2 Memory Saver
$32.99Part No: 71
OBD2 Memory Saver
$32.99The Allstart OBD2 Memory Saver is an accessory that works with the Micro Boost and Boost Portable 1ST and 2nd generation power units, as well as most other Lithium Jump Starters on the market. The only Memory saver designed for use with lithium portable power units with fuse and back charge protection. No need to lug around heavy lead acid jump starters. Saves service time during battery disconnect or exchange, by removing the need to document and reprogram settings back into the various components and accessories.
Works with the 540 Micro Boost, 550 Boost, or 2nd Generation 560 Boost Max. Does NOT work with the 1st Generation 560 Boost MAX.
Patent Pending
Quick View -
3 Pin EC5 Replacement Clamps
$30.36Part No: 561-4
3 Pin EC5 Replacement Clamps
$30.36Quick View -
Intelli-Cables Jumper Cables
$24.99Part No: 551
Intelli-Cables Jumper Cables
$24.99FEATURES
- The 551 Intelli-Clamps are for use with Allstart Micro Boost (540) and Boost (550)
- Powerful, high capacity Nano Lithium battery
- Fast Charging with low Self-Discharge cycle
- Up to 1500 Charging cycles
- 12V vehicle jump-start, back up charger for all brands of cellphones, notebooks, tablets, and other portable electronics
- Includes Smart-Clamps for jump starting with built-in safety and diagnostic features
- Four different types of charging modes: 5V 2A, 5V 1A, 19V 3.5A, 12V 10A
- Dimensions: 9.13″ L x 1.13″ H x 3.5″ W
- Weight: 1.50 lbs
- Intelli-Cables from Allstart are the safest and most durable clamps on the market for your lithium jump starters. Built in safety features such as No spark safety, cross polarity protection, short circuit protection, automatic shutdown, Real time amperage reading, LED feedback, and automatic cool down.
Quick View -
Folding Wireless Charger
$24.75Part No: 598AS
Folding Wireless Charger
$24.75FEATURES
- Simple use, place your wireless charging enabled phone on the base and begin to charge
- With two charging coils, charge in either orientation
- Powerful enough to charge through many protective cases
- Unit will charge phones in folded and unfolded positions
- Folds for convenient storage, making it great for travel
Quick View -
AC Charger
$22.03Part No: 550-3
AC Charger
$22.03FEATURES
AC Wall Charger for use with several AllStart lithium battery jump starters. Works with:
- First and Second Generation Micro Boost 540
- First Generation Boost 550
- First Generation Boost Max 560
Quick View -
DC Charger
$15.71Part No: 550-4
DC Charger
$15.71FEATURES
DC Charger for use with several AllStart lithium battery jump starters. Works with:
- First and Second Generation Micro Boost 540
- First Generation Boost 550
- First Generation Boost Max 560
Quick View
